Miracle Tile & Stone Cleaner. Following installation, wipe up the grout residue with a damp sponge and clean water. If you return the next day and notice grout haze, try lightly buffing the haze with a clean, dry cloth to remove it. If there is still some stubborn grout residue left over, it can be removed with any. Grout experts, Fusion Pro, Kerapoxy. But not at all difficult if you follow the instructions. Have any of you used TEC Power Grout? Download Delphi Keygen To All Versions. I see HD carried Fusion Pro.

Health Precautions Contains ethylene glycol, 2-butoxy ethanol and acrylic latex. Avoid contact with eyes and skin. Do not take internally. CAUTION: KEEP OUT OF REACH OF CHILDREN. Use in well-ventilated areas. Wear chemical resistant gloves and eye protection. FIRST AID: If eye or skin contact, flush thoroughly with water.

In case of respiratory tract irritation, move person to fresh air. If irritation persists, seek medical attention. If ingested, do not induce vomiting. Seek medical attention. This product contains a chemical or chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Limitations to the Product • Should not be installed when ambient or surface temperature is lower than 50° F (10° C) or above 90° F (32° C). • Some ceramic, glass, metal, marble or stone tiles can be scratched or damaged by the silica aggregate filler.

Perform a test on a small area prior to use. • Tile or stone with high absorption, surfaces that are porous or rough, textured surfaces and some types of porcelain tile generally require sealing prior to grouting to prevent possible staining. • Do not use Fusion Pro with irregularly shaped or spaced tile or stone, such as pebble stones, where joint widths or depths exceed 1/2'. • Not for use in either industrial applications or in areas subjected to harsh or continuous chemicals, high heat or high-pressure cleaning. For heavy industrial tile installations, use.

• Not for use over concrete slabs with high moisture emission rates. • Not for use in steam rooms or submerged applications (swimming pools, spas, water features and fountains). • Not for use in movement joints or changes of plane in the tile installation. In these areas us an appropriate caulk or sealant such as. Application of Product • Pre-seal natural stones and porous or rough textured tile with,. • Fusion Pro cures by evaporation.

Ensure setting material has dried sufficiently, substrate does not have a high moisture emission rate and work area has adequate ventilation. • Only spread for 1-4 minutes before cleaning grout off the tile surface. More can be spread in cool, damp conditions; less in hot, dry conditions. • Do not allow Fusion Pro to dry or skin over prior to final cleaning. If grout dries on surface during installation, lightly moisten and wait 2-4 minutes, then gently clean tile surface using sponge or white nylon scrubber. Download the Fusion Pro Installation Guide on our website for additional details. Fusion Pro is a new technology grout with significant advantages over traditional grouts, requiring modified installation techniques to achieve best results.

Do not apply or clean up this grout as typically done with cement or epoxy grout. Moisten tile with a lightly damp microfiber towel. Do not allow any water to puddle on the surface of the tile or in the grout joints. Use a medium to hard grout float to spread grout. Spread grout and fill joints for 1-4 minutes (working time is based on experience with Fusion Pro, tile and grout joint type). More grout can be spread in cool, damp conditions; less in hot, dry conditions. Drag the edge of the float diagonally across the tile to remove excess grout while leaving the joints full. Cleaning of grouted area should begin immediately, before grouting next section.

Use a lightly damp grout sponge held flat against the tile to moisten applied grout. Do not allow water to puddle on the surface or in the grout joints. Working the entire area, use a circular motion and moderate pressure to loosen any grout that is still adhered to the tile surface. Limit the number of times you rinse out the sponge at this stage. The residue on the sponge will help break up and soften residue on the surface of the tile. Do not over scrub as it may pull grout out of the joints. Grout joints must remain full.

In areas where the Fusion Pro is well-adhered, leaving a visible film that is not releasing from the surface of the tile, re-apply a small amount of Fusion Pro. Slurry the grout with the clean up sponge until clean (approximately 30 seconds). Eminem Platinum Collection Download on this page. Wipe the area clean with a rinsed, lightly damp sponge, followed by a lightly damp microfiber towel. Once grout on tiled surfaces has been loosened, thoroughly rinse and wring out the sponge. Wipe the sponge once across the grouted tile diagonally to clean the face of the tile and create smooth consistent grout joints. Flip the sponge over and continue cleaning the next area. Rinse, wring and repeat until you have dragged a clean sponge face across the entire area of freshly grouted tile. Lastly, drag a lightly damp microfiber towel across the surface for final clean up.